Image displayed shows the product type but may not be the exact item

SKF 6005-2ZNR Shielded Ball Bearing With Snap Ring 25mm x 47mm x 12mm

Quantity Discounts: Applied at checkout

5+: £11.74      10+: £11.08      25+: £10.43      50+: £9.78

£13.04
(Exc. 20% VAT)
(£15.65 Inc. VAT)
Available for prompt despatch.
+
Ashley Part Number:
6005ZZNR-SKF
Brand:
SKF
Inside Diameter (d):
25.00mm
Outside Diameter (D):
47.00mm
Width (B):
12.00mm
Weight
90 g
SKF
Description

SKF Deep Groove Ball Bearing 6005-2ZNR Metal Shielded C/W Snap Ring

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds. The snap ring groove simplifies arrangement design as the bearings can be axially located in the housing by the snap ring.

Related Products
Technical Information
d: 25mm   D4: 52.7mm
D: 47mm   b: 1.35mm
B: 12mm   f: 1.12mm
Dynamic Load: 11.9 kN   C: 2.06mm
Static Load: 6.55 kN   r1,2 min: 0.6mm
Fatigue Load Limit: 0.275 kN   ro max: 0.4mm
Reference Speed: 32000 rpm   da min: 28.2mm
Limiting Speed: 16000 rpm   Da max: 43.8mm
Snap Ring: SP 47   Db min: 54mm
d1: 32mm   ba min: 1.5mm
D2: 42.2mm   Ca max: 3.18mm
D3: 44.6mm   ra max: 0.6mm

Customer Reviews (0)

Be the first to Write a Review for this item!