Image displayed shows the product type but may not be the exact item

SKF 6208NR Open Ball Bearing With Snap Ring 40mm x 80mm x 18mm

Quantity Discounts: Applied at checkout

5+: £26.85      10+: £25.36      25+: £23.86      50+: £22.37

£29.83
(Exc. 20% VAT)
(£35.80 Inc. VAT)
Available for prompt despatch.
+
Ashley Part Number:
6208NR-SKF
Brand:
SKF
Inside Diameter (d):
40mm
Outside Diameter (D):
80mm
Width (B):
18mm
Weight
370 g
SKF
Description

SKF Deep Groove Ball Bearing 6208NR Open C/W Snap Ring

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds. The snap ring groove simplifies arrangement design as the bearings can be axially located in the housing by the snap ring.

Technical Information
d: 40mm   D4: 86.6mm
D: 80mm   b: 1.9mm
B: 18mm   f: 1.7mm
Dynamic Load: 32.5 kN   C: 3.28mm
Static Load: 19 kN   r1,2 min: 1.1mm
Fatigue Load Limit: 0.8 kN   ro max: 0.6mm
Reference Speed: 18000 rpm   da min: 47mm
Limiting Speed: 11000 rpm   Da max: 73mm
Snap Ring: SP 80   Db min: 88mm
d1: 52.6mm   ba min: 2.2mm
D2: 69.8mm   Ca max: 4.98mm
D3: 76.81mm   ra max: 1mm

 

Customer Reviews (0)

Be the first to Write a Review for this item!