Image displayed shows the product type but may not be the exact item

SKF 63000-2RS1 Sealed Ball Bearing 10mm x 26mm x 12mm

Quantity Discounts: Applied at checkout

5+: £13.17      10+: £12.44      25+: £11.70      50+: £10.97

£14.63
(Exc. 20% VAT)
(£17.56 Inc. VAT)
Available for prompt despatch.
+
Ashley Part Number:
630002RS-SKF
Brand:
SKF
Inside Diameter (d):
10mm
Outside Diameter (D):
26mm
Width (B):
12mm
Weight
30 g
SKF
Description

SKF Deep Groove Ball Bearing 63000-2RS1 Rubber Sealed

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

Technical Information
d: 10mm
D: 26mm
B: 12mm
Dynamic Load: 4.62 kN
Static Load: 1.96 kN
Fatigue Load Limit: 0.083 kN
Reference Speed: 67000 rpm
Limiting Speed: 19000 rpm
d1: 16.7mm
D2: 24.8mm
r1,2 min: 0.3mm
da min: 14.2mm
Da max: 23.8mm
ra max: 0.3mm

 

 

 

Customer Reviews (0)

Be the first to Write a Review for this item!